-2" [50.8 mm] over travel
-.38" [9.6 mm] side space
-Tested drawer width 16"
-Low profile height 1.62" (41.4 mm):Lever disconnect
-Even lengths 12"–30" [305–762 mm]
-Clear zinc finish

120 lb./55 kg

-The front and rear supports are suitable for 5/8-inch and 1/2-inch pitch modes and double 5/8-inch mode.
-The supports and the fasteners are suitable for the slot hole, the round hole or the joint type hole of the cabinet side frame.
-The adjustable support can adapt to whole series of cabinet depths and the drawer installation location.
-The sliding rail mounting pass is suitable for different installation positions of the drawer.

-2907WB　技术文件
-CAD 图 (*.dxf)